Low Mist In-Shower Mirror
We have added some simple low-mist in-shower acrylic mirrors to the range for those of you who like to shave in the shower or see your face in the mirror while cleansing. These are lightweight solutions and we'll send them with two triangle nanotapes to adhere to your shower surface.
The mirror is very slim and measures 17cm x 13cm with a 2.5cm hole in the short side.
1) Stick the nanotapes at the top and bottom of the back side of the mirror. Think carefully about placement before adhering in the shower because it won't be easily possible to move it. If you need the mirror to be used at different heights, you might want to use hooks instead located at the various levels you need but the mirror won't necessarily be that stable hanging it this way. If you want to remove a mirror stuck with nanotape completely, you'll need a twisting motion and it may mean the mirror is damaged in the process, because it is made from bendy acrylic.
2) This is a low-mist mirror not mist-free. When you first install it, rub a thin sheen of dishwashing liquid over it. You'll need to repeat this action whenever the mirror becomes a bit 'cloudy'. There's no 'tech' in this mirror for demisting. It's a sheet of acrylic with a mirrored surface and more of a manual solution.
3) Before sticking to your surface, try sellotaping it to check whether it's at the right height to be usefully useable. Do some simulations of your intended usage to make sure you'll be able to see what you need to!
We've added this mirror to the range after many requests for one, but we have found that the market for in-shower mirrors is limited and most of the options are heavy and needing strong mounting solutions. So we've gone for the other end of the range - super lightweight and good enough to take care of the basics. And you won't have to spend a fortune or risk breaking glass in your shower.